{"product_id":"aluminium-tvc-40x26mm-x-2-7m-anodised-lvt-stair-nosing-edge-profile-for-3mm-floo","title":"Aluminium TVC 40x26mm x 2.7m Anodised LVT Stair nosing Edge Profile For 3mm Floo","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAluminum Edge Protection for 3mm LVT Stairs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis 2.7m aluminium stair nosing is designed to create a clean and structured finish where 3mm LVT flooring reaches the front edge of a stair. The rigid profile helps cover the exposed flooring edge while providing a defined transition between the tread and the vertical face of the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIts aluminium construction gives the profile greater rigidity than flexible PVC or vinyl trims. This makes it suitable for installations where a firm stair edge is preferred and the flooring needs a dedicated finishing profile to reduce direct wear around exposed edges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e40 x 26mm Straight Profile for Defined Coverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe stair nosing has a listed profile size of 40mm x 26mm and a straight nosing shape. These dimensions should be checked against the staircase before installation to make sure the trim provides the required tread and edge coverage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA straight profile can suit contemporary staircase designs where clean lines and a simple transition are preferred. The shape helps create a consistent edge without introducing a rounded or bullnose appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause staircase dimensions can vary, particularly in renovated properties, individual stairs should be measured before the profile is prepared or cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003e2.7m Length for Flexible Staircase Planning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2.7m continuous length gives greater flexibility when preparing sections for different stair widths. Depending on the staircase dimensions, one length may be divided into several pieces rather than purchasing individual pre-cut sections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlanning all required measurements before cutting can help minimise waste and make better use of the available profile. Each stair should be measured independently instead of assuming that every tread has exactly the same width.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSuitable metal-cutting equipment should be used when preparing aluminium profiles so that each section has a clean edge and can be positioned accurately during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eScrew Fixing for Stable Profile Positioning\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed fixing method is screws, providing a mechanical installation rather than relying solely on adhesive. Screw mounting can be useful where a rigid aluminium profile needs to remain firmly positioned against the stair edge during regular use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore installation, the underlying stair surface should be stable, clean and suitable for mechanical fixing. The profile should first be positioned accurately so the fixing points can be planned without disturbing the surrounding flooring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAppropriate screws and preparation methods should be selected according to the staircase material and subfloor. The supplied details do not specify particular screw dimensions, so these should be matched to the installation rather than assumed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eMaintaining the Anodised Aluminium Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRoutine maintenance can help preserve the appearance of the anodised aluminium surface and prevent dust or debris from collecting around the stair edge. A soft cloth, brush or vacuum is generally suitable for regular cleaning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor marks that require wiping, use a mild cleaning method compatible with anodised aluminium. Abrasive pads or aggressive cleaning products should be avoided because they may affect the surface appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe screw fixings should also be checked periodically. If the profile begins to move or a fixing becomes loose, it should be addressed promptly so the stair nosing continues to sit securely and evenly against the step.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan role=\"text\"\u003e\u003cstrong\u003eProduct Specifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile Length:\u003c\/strong\u003e 2.7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile Size:\u003c\/strong\u003e 40mm x 26mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlooring Thickness:\u003c\/strong\u003e 3mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlooring Application:\u003c\/strong\u003e LVT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface:\u003c\/strong\u003e Anodised Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNosing Edge Shape:\u003c\/strong\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing Method:\u003c\/strong\u003e Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable For:\u003c\/strong\u003e Stair Edges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Flooring Edge Finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United Kingdom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair nosing designed for 3mm LVT flooring?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The product title identifies this aluminium profile for use with 3mm flooring, particularly LVT. Checking the actual flooring thickness before fitting is important so the profile matches the intended installation and sits correctly around the finished stair edge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat are the dimensions of the aluminium profile?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed profile size is 40mm x 26mm, while the overall supplied length is 2.7 metres. These measurements should be compared with the tread and front edge of the staircase before the profile is prepared or installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs this stair edging made from aluminium?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. Aluminium is the listed material. It provides a rigid stair-edge profile that maintains its shape after fitting and offers a firmer finishing option than flexible vinyl, PVC or rubber-based stair edging.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat shape does the stair nosing have?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications describe the nosing edge as straight. This creates a clean, defined transition around the stair edge and can suit flooring installations where a simple profile is preferred instead of a rounded bullnose design.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow is the aluminium stair profile fixed?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe listed fixing method is screws. The correct screws and preparation method should be selected according to the stair construction and underlying surface because the supplied information does not specify particular screw sizes or types.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan the 2.7m profile be cut into shorter lengths?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. The long profile can be prepared into sections to suit individual stair widths using appropriate aluminium-cutting tools. Measure each stair separately before cutting to improve accuracy and reduce unnecessary material waste.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat does the 40 x 26mm measurement mean?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt refers to the listed profile size. These dimensions help determine how much of the stair tread and front edge the nosing can cover, so they should be checked against the staircase before purchase or installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIs adhesive required for installation?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe supplied specifications only state screws as the fixing method. No adhesive requirement is provided, so additional fixing products should not be assumed unless they are appropriate for the particular flooring and staircase installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow should anodised aluminium stair nosing be cleaned?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse a soft cloth, brush or vacuum for routine maintenance. Mild cleaning methods suitable for anodised aluminium can be used for marks, while abrasive pads and aggressive chemicals should be avoided to protect the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhen is a straight aluminium profile a practical choice?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt is useful where 3mm LVT flooring needs a rigid and clearly defined stair edge. The straight 40 x 26mm profile combines mechanical screw fixing with a long 2.7m format that can be prepared for multiple steps.\u003c\/span\u003e\u003c\/p\u003e","brand":"Antifatigue Stair Nosing","offers":[{"title":"Brushed Silver – 40mm × 26mm × 2.7m","offer_id":58733663912320,"sku":null,"price":72.43,"currency_code":"GBP","in_stock":true},{"title":"Matt Black – 40mm × 26mm × 2.7m","offer_id":58733663945088,"sku":null,"price":72.43,"currency_code":"GBP","in_stock":true},{"title":"Matt Silver – 40mm × 26mm × 2.7m","offer_id":58733663977856,"sku":null,"price":72.43,"currency_code":"GBP","in_stock":true},{"title":"Bronze – 40mm × 26mm × 2.7m","offer_id":58733664010624,"sku":null,"price":72.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1011\/7355\/9680\/files\/s-l1600_2d157ea3-f8d6-4b82-8f23-300c53a4e367.webp?v=1787139893","url":"https:\/\/antislipstairnosing.co.uk\/products\/aluminium-tvc-40x26mm-x-2-7m-anodised-lvt-stair-nosing-edge-profile-for-3mm-floo","provider":"Anti Slip Stair Nosing","version":"1.0","type":"link"}