• Aluminium Stair Nosing

• 2.7m Long Edge Trim

• 46 x 30mm Profile

• Anti Non-Slip Stair Edge Design

• Practical Step-Nose Edging for Stair Finishing and Edge Protection

A Long Aluminium Profile for Stair Edges

This 2.7m aluminium stair nosing is designed to provide a finished edge along the front of a stair tread. Its extended length makes it suitable for projects where longer sections of stair-edge trim are preferred, helping reduce the need for multiple shorter pieces across a suitable stair installation.

The profile measures 46 x 30mm, providing a substantial edge treatment that can give the front of a step a clearly finished appearance. It is listed as an anti non-slip stair nosing, making it relevant to projects where a dedicated stair-edge profile with a non-slip design is required.

Aluminium provides the main construction of the profile, offering a clean metal finish suitable for a range of stair and flooring applications. Before purchasing or installing, compare the profile dimensions with the existing stair edge to ensure the size is appropriate.

46 x 30mm Profile for Step-Edge Finishing

The 46 x 30mm dimensions provide the key measurements for planning the installation. The profile should be checked against the available front edge and tread area of the staircase before fitting, particularly where the existing flooring has already been installed.

A correctly positioned nosing can create a consistent transition between the stair tread and its leading edge. The relatively substantial 46 x 30mm profile is designed to be clearly visible, so it can form an important part of the overall appearance of the finished stair.

Accurate measurement is especially important when working across multiple steps. Although the profile is supplied at 2.7m, individual stair widths may vary, so each tread should be measured rather than assuming every step requires exactly the same length.

Aluminium Construction for a Clean Stair Trim

The product is specified as an aluminium stair nosing. Aluminium provides the main profile material and gives the trim a straightforward metal appearance suitable for practical stair-edge applications.

The supplied specifications do not state the particular aluminium grade, surface treatment, colour or finish. These details should therefore not be assumed. The reliable product information provided is the aluminium construction together with the stated dimensions and non-slip description.

Its simple profile can work with different stair surfaces, depending on the dimensions and fixing requirements of the installation. Checking the existing stair construction before fitting will help determine whether this profile is suitable for the intended application.

Anti Non-Slip Design for Stair Applications

The product title describes the profile as anti non-slip, making surface grip one of its intended characteristics. This makes it relevant to stair projects where the leading edge needs more than a plain decorative metal trim.

However, the supplied information does not provide a specific slip-resistance rating, test result or certification. For that reason, the profile can be described according to the supplied non-slip wording, but a particular safety classification should not be assumed.

When installing the nosing, ensure it is correctly aligned along the leading edge of the tread. A stable and even installation can help the profile perform as intended and maintain a consistent appearance across the staircase.

2.7m Length for Efficient Installation Planning

The 2.7m length gives this profile considerable coverage for stair-edge projects. It can be particularly useful where longer sections are preferred, as the extended length allows the installer to plan cuts according to the dimensions of the individual stairs.

Before cutting, measure each required section carefully and allow for the actual dimensions of the stair. Planning the cuts in advance can also help reduce unnecessary material waste when several steps are being finished.

The 2.7m length should not be interpreted as meaning that the product will cover any particular number of stairs, since this depends entirely on the width of each tread and the way the profile is being installed.

Choosing the Right Fit for Your Staircase

This aluminium stair nosing provides a substantial 46 x 30mm edge profile with a 2.7m length and a non-slip design. It can be considered for stair projects where a clearly visible aluminium step-edge trim is required.

Before installation, check the stair width, available fixing area, existing floor covering and profile dimensions. These checks are particularly important because the supplied specifications do not provide details about the fixing method or installation hardware.

The product information also does not specify a particular room type, flooring material or stair substrate. Selecting the profile should therefore be based on the actual dimensions and construction of the staircase rather than assuming compatibility with every stair design.

Product Specifications

• Condition: New
• Product Type: Aluminium Stair Nosing Edge Trim
• Material: Aluminium
• Size: 2.7m
• Profile Dimensions: 46 x 30mm
• Features: Anti Non-Slip
• Custom Bundle: No
• Non-Domestic Product: No
• Modified Item: No
• MPN: Does Not Apply

Frequently Asked Questions

What material is this stair nosing made from?

The profile is made from aluminium. The supplied product information does not specify the particular aluminium grade or surface treatment, so these technical details should not be assumed.

What length is the stair nosing?

The profile is 2.7m long. This extended length provides substantial coverage and allows sections to be planned according to the individual dimensions of the stairs.

What are the profile dimensions?

The stated profile dimensions are 46 x 30mm. These measurements should be compared with the available stair-edge area before installation to check that the profile will fit correctly.

Is this stair nosing non-slip?

Yes. The product title describes it as anti non-slip. However, no specific slip-resistance rating, testing information or certification is supplied with the product details.

Can the 2.7m profile be used on several stairs?

It can potentially be cut into suitable sections for multiple stair edges, depending on each tread's width. Measure the individual stairs first to plan the required sections accurately.

Is this suitable for different stair surfaces?

The supplied information does not specify particular stair substrates or flooring materials. Suitability should therefore be checked against the construction, dimensions and fixing surface of the existing staircase.

Does the product include fixing hardware?

The supplied specifications do not state that fixings are included. The installation method and fixing requirements should therefore be confirmed before purchasing if these details are important.

Should each stair be measured before installation?

Yes. Measuring every tread is recommended because stair widths can vary. Accurate measurements also help determine how the 2.7m length should be cut and positioned.

What is the benefit of the 2.7m length?

The longer profile provides more material in one section, which can be useful for stair projects requiring extended coverage. It also gives flexibility when planning cuts for individual step edges.

What should I check before fitting the profile?

Check the 46 x 30mm profile dimensions, stair width, available fixing area and existing flooring or tread construction. Confirming these details beforehand helps establish whether the profile is suitable.