• 2.7m Length

• Modern Stair Finish

• Aluminium Construction

• Non-Slip Stair Edge Nosing

• 65 x 42mm Aluminium Profile Supplied with Fixing Screws

Wider 65 x 42mm Coverage for Stair Edges

This 2.7m aluminium stair nosing provides a practical way to finish the exposed leading edge of a staircase while adding a non-slip contact area. Its 65 x 42mm profile gives substantial coverage around the stair edge, making the dimensions an important consideration when checking compatibility with an existing tread and riser.

The aluminium construction creates a rigid finishing profile that can help produce a cleaner transition around the front of a step. Its modern styling also keeps the appearance straightforward, making the nosing suitable where a functional edge treatment is preferred over a decorative trim.

Before ordering or cutting, both dimensions should be compared carefully with the actual staircase. Stair profiles can vary between properties, and even individual steps on the same staircase may not always be identical.

Non-Slip Aluminium Construction for Regular Stair Use

The product is specified as non-slip, placing additional grip around an area that receives repeated contact as people move up and down stairs. Keeping this surface clean is important because accumulated dust or loose debris can reduce the effectiveness of any grip-focused stair finish.

Aluminium gives the profile structural rigidity and provides a defined edge around the step. This can be useful where the original stair edge requires a more complete finishing treatment rather than a narrow decorative strip.

The 65mm by 42mm format should not be selected on size alone. The shape of the stair edge, existing floor covering and available fixing area should all be considered together to determine whether the profile will sit correctly.

Planning the 2.7m Length Before Cutting

A continuous 2.7m length provides flexibility when nosing sections are required across several individual steps. How many stairs can be covered depends on the width of each tread and the amount lost during trimming.

Measure every required stair individually before dividing the profile. Adding the stair widths together can provide an initial quantity estimate, but a reasonable allowance should also be made for cuts and final adjustments.

Planning the cutting sequence before making the first cut can make more efficient use of the supplied length. Accurate measurements are particularly useful when several sections need to be produced from a single profile.

Fitting the Profile with the Supplied Screws

Screws are included with the stair nosing, supporting a mechanically fixed installation. However, the supplied information does not specify the exact fixing procedure, screw dimensions or compatible substrate, so these factors should be checked against the actual staircase before installation.

The stair edge should provide a stable surface for the profile to sit evenly. Positioning should be checked before permanent fixing so the nosing follows the edge consistently without unwanted gaps or misalignment.

The appropriate installation method can depend on the material beneath the profile. Where there is uncertainty about the stair substrate or fixing requirements, installation guidance suitable for that construction should be followed rather than assuming the same fixing arrangement works on every staircase.

Where the Product Works Best

This profile is most relevant for stairs where a 65 x 42mm aluminium edge treatment matches the existing tread and riser dimensions. Its non-slip design makes it a practical option where additional grip and a finished leading edge are both required.

The 2.7m format can also be useful for projects involving several steps because individual sections can be planned around the required stair widths. The actual number of sections available from one length will depend on measurements and cutting allowance.

Maintenance Information

Keep the stair nosing free from dust, grit and loose debris, particularly around the non-slip surface. Routine cleaning helps maintain both the appearance of the aluminium and the cleanliness of the grip area.

Cleaning products should be suitable for aluminium. Avoid unnecessarily abrasive tools or chemicals where their compatibility with the actual surface finish has not been confirmed.

After installation, inspect the profile and its fixing points periodically. Any movement, raised sections or loose screws should be addressed promptly so the nosing continues to sit evenly around the stair edge.

Product Specifications

• Condition: New
• Length: 2.7m
• Material: Aluminium
• Profile Size: 65 x 42mm
• Surface Feature: Non-Slip
• Style: Modern
• Set Includes: Screws
• Colour: Not Specified
• Surface Finish: Not Specified
• Installation Location: Not Specified

Frequently Asked Questions

Is this stair nosing made from aluminium?

Yes. The supplied information lists aluminium as the material. This gives the nosing a rigid profile for creating a finished transition around the leading edge of compatible steps.

What size is the stair nosing profile?

The product title states a 65 x 42mm profile and an overall length of 2.7m. Check both dimensions against the actual stair edge before cutting or fitting.

Does this stair nosing have a non-slip design?

Yes. Non-slip performance is listed as a product characteristic. The profile is intended to add grip around the stair edge while providing a neat finishing detail.

Are screws included with the stair nosing?

Yes. Screws are listed among the supplied items. The exact fixing procedure and suitable substrate are not specified, so the stair construction should be checked before installation.

Can the 2.7m length be cut for individual steps?

The 2.7m profile can be planned around individual stair widths where suitable cutting tools are used. Measure every step first and allow for trimming and accurate fitting.

Is this suitable for modern interiors?

The supplied information lists the style as modern. Its aluminium construction can suit contemporary stair installations where a clean edge treatment and practical non-slip surface are required.

What should I measure before ordering?

Measure each stair width and the shape of the leading edge, then compare the available space with the 65 x 42mm profile. This helps reduce fitting problems.

Does the listing specify a colour or finish?

No. The supplied information does not state a colour or surface finish. These details should be confirmed separately rather than assumed from the aluminium material.

How should the nosing be maintained?

Keep the profile free from dust and loose debris, particularly around the non-slip area. Use cleaning methods suitable for aluminium and periodically inspect fitted sections for movement or damage.

What should be checked before installation?

Confirm the stair dimensions, substrate condition, cutting requirements and suitability of the supplied screws. The profile should sit securely and evenly without creating an unwanted obstruction at the stair edge.