• Matt Finish

• 2.7m Aluminium Profile

• 26 x 40mm Stair Nosing

• Screw-Fixed Edge Trim for 3mm LVT

• Anodised Aluminium Profile for Clean Click Vinyl Stair Finishing

Edge Protection for 3mm LVT Stairs

This 2.7m anodised aluminium stair nosing is designed to finish the exposed edge of stairs fitted with 3mm LVT or luxury click vinyl flooring. The rigid metal profile creates a clean transition around the front of the tread while helping protect the flooring edge from repeated everyday contact.

Its aluminium construction provides a firmer alternative to flexible PVC or rubber profiles. This makes it suitable for installations where a precise, structured stair edge is preferred and the click vinyl needs a dedicated finishing profile rather than being left exposed.

26 x 40mm Profile for Accurate Floor Transitions

The listed profile size is 26 x 40 x 3mm, allowing the dimensions to be checked against both the stair edge and the flooring before installation. Correct sizing is particularly important with LVT because the profile needs to integrate neatly with the finished floor surface.

The profile is specifically presented for 3mm flooring, helping create a more deliberate transition between the luxury vinyl surface and the stair edge.

Each step should be measured before the profile is prepared, especially where an existing staircase has small differences in width from one tread to another.

2.7m Length for Flexible Staircase Layouts

The profile is supplied in a 270cm, or 2.7m, length. This longer format allows the aluminium to be prepared according to the measurements required for a particular staircase rather than relying only on short pre-cut sections.

Planning the required lengths before cutting can help make better use of the available profile. Suitable tools intended for aluminium should be used when shortening sections so the finished edges remain clean and easier to align during fitting.

The supplied information also lists the length as 8.10ft, providing an imperial reference alongside the metric measurement.

Screw-Fixed Installation for Firm Positioning

The listed installation method is screw fixing. Mechanical fastening can provide firm positioning for a rigid aluminium stair profile when suitable screws and preparation methods are used for the underlying stair structure.

Before fixing, the profile should be positioned carefully along the intended edge so its alignment can be checked. The staircase surface should be stable, clean and suitable for the selected fixing method.

The supplied specifications state that the profile can be installed over any subfloor. However, the actual screws and preparation required should still be selected according to the material and condition of the staircase.

Matt Anodised Finish for Modern LVT Flooring

The anodised aluminium construction has a matt finish, giving the profile a restrained metallic appearance rather than a highly reflective surface. This can complement contemporary click vinyl and LVT flooring where clean lines and subtle finishing details are preferred.

Routine care can be carried out using a soft cloth or non-abrasive cleaning method suitable for anodised aluminium. Harsh pads or aggressive cleaners should be avoided to reduce the risk of marking the matt surface.

The screw fixings should also be checked periodically to ensure the profile remains stable and evenly positioned around the stair edge.