• Grey Finish

• 5m Length

• Stair Edge Trim

• 40 x 20mm Edge Profile

• 70mm Overall Grey Anti-Slip Nosing for Practical Stair Edge Protection

5m Stair Nosing for Continuous Edge Protection

Stair edges experience regular contact from footwear and everyday movement, making the front edge of each step an important area during maintenance and refurbishment. This grey stair nosing trim provides a practical edging solution for covering and finishing suitable stair-step edges.

Supplied in a 5m length, the trim is particularly useful for projects involving multiple steps or longer continuous sections where a single roll or length can reduce the need for numerous short pieces. The grey finish offers a neutral appearance that can complement a variety of existing stair surfaces.

Anti-Slip Edge Trim for Everyday Stair Use

The anti-slip design provides a textured edge area intended to offer additional grip around the front of the stair. Stair nosing is positioned at a high-contact part of the step, so selecting a suitable profile can be an important consideration when improving an existing staircase.

The 70mm overall measurement and 40 x 20mm edge profile should be checked against the available tread and riser area before purchase. The exact suitability of the trim will depend on the construction, dimensions and condition of the individual stairs.

Grey Finish for Practical Stair Renovation

The neutral grey finish gives the trim a straightforward appearance that can work with many interior stair designs. It can complement darker, lighter and neutral surfaces while providing a visible edge detail around the front of the step.

The product is listed as stair edging and falls within the treads and risers category, making it suitable for consideration during appropriate DIY, maintenance and stair renovation projects. Measuring the staircase before installation is recommended to ensure the profile provides the required coverage.

Planning the Installation Before Fitting

Before fitting the stair nosing, inspect the surface where the trim will be installed and remove dust, dirt, loose material and other contaminants. A clean and stable surface helps provide a more suitable base for stair-edge installation.

The 5m length can be measured and cut according to the individual requirements of the project. Plan the required sections carefully before cutting to minimise unnecessary joins or material waste. The 70mm overall dimension should also be considered when determining how the trim will sit across the stair edge.

Choosing the Correct Profile for Your Steps

Stair nosing profiles vary in size and shape, so checking measurements before ordering is essential. This product has a stated 70mm overall dimension with a 40 x 20mm edge profile. Compare these measurements with the tread depth, riser position and exposed front edge of the existing staircase.

For projects covering several steps, the 5m supplied length can provide substantial material for measuring and cutting individual sections. However, the final quantity required will depend on the dimensions and number of stairs being treated.

Product Specifications

• Condition: New
• Product Type: Stair Edging
• Length: 5m
• Overall Width: 70mm
• Edge Profile: 40 x 20mm
• Colour: Grey
• Feature: Anti-Slip
• Number of Items in Set: 1
• Number in Pack: 1

Frequently Asked Questions

What is this stair nosing trim used for?

This stair nosing trim is designed for covering and finishing suitable exposed stair edges. It can be considered for stair maintenance, refurbishment and DIY projects where an anti-slip edging profile is required. Its purpose is to provide a practical edge treatment while giving the front of the step a more finished appearance.

How long is the stair nosing?

The supplied length is 5 metres. This provides a relatively long continuous section that can be measured and cut for multiple stair edges, depending on the width of the individual steps. Planning the required cuts before installation can help make better use of the supplied length and reduce unnecessary material waste.

What are the profile dimensions?

The product is listed with a 70mm overall dimension and a 40 x 20mm edge profile. These measurements should be compared with the existing stair before ordering. Checking the tread and riser arrangement is particularly important to ensure the trim can sit correctly without interfering with normal use of the step.

Is this stair nosing anti-slip?

Yes. The product title describes the trim as anti-slip. Its purpose is to provide a more practical textured edge area around the front of the stair. The level of grip experienced during use can vary according to footwear, moisture, surface contamination, installation and general product condition.

What colour is the stair edge trim?

The trim is grey. Grey is a neutral finish that can complement many stair surfaces and interior colour schemes. It can work particularly well where a subtle but visible edge detail is preferred rather than a strongly contrasting colour.

Can the 5m trim be cut for individual stairs?

The supplied length allows the material to be measured for the specific requirements of a stair project. If individual sections are needed, the required lengths should be carefully measured before cutting. Accurate planning is recommended so that sufficient material remains for all intended stair edges.

Is this suitable for multiple stair steps?

The 5m length can be useful for projects involving multiple steps, depending on the width of each stair and the amount of trim required per step. Measure the individual stair edges and calculate the total required length before ordering to determine whether one 5m piece provides sufficient coverage.

What should I check before buying?

Check the stair width, tread depth, riser position and available edge area against the 70mm overall dimension and 40 x 20mm profile. You should also consider the total number of stairs requiring protection and calculate the required length. These checks help ensure the trim is suitable for the intended application.

How should the stairs be prepared before fitting?

The application area should be clean, dry and free from dust, dirt, grease, loose material and other contaminants. Any unstable or damaged surface should be addressed before installation. Proper preparation helps create a cleaner fitting surface and reduces potential problems caused by debris beneath the stair edging.

How many items are included?

The product is listed as 1 under both Number of Items in Set and Number in Pack. This indicates that the supplied quantity is one 5m stair-nosing length. If the project requires more than 5m of coverage, additional quantities may be needed based on the total measured length.