• Aluminium Stair Nosing

• 900mm Long Profile

• 46mm Wide Edge

• 30mm Profile Height

• Aluminium Step Nose Edging for Carpeted Stairs, Supplied with Screws for a Practical Installation

Aluminium Stair Nosing for Carpeted Steps

This aluminium stair nosing edge trim is designed for finishing the front edge of stairs and steps, particularly where carpet is used as the floor covering. The profile provides a dedicated step-nose detail at the leading edge of the tread, helping create a more structured and finished appearance across the staircase.

With dimensions of 900mm x 46mm x 30mm, the profile provides a substantial edge section for stair applications. The 900mm length can be considered for individual stair sections, while the 46mm width and 30mm height should be compared with the available tread and carpet arrangement before purchasing.

900mm Length and 46mm Width for Stair Edging

The 900mm length provides a practical section for measuring against individual stair treads. Before installation, each step should be measured carefully because tread widths can vary depending on the staircase construction.

The 46mm dimension is also important when assessing how the nosing will sit across the front portion of the tread. Buyers should compare this measurement with the available stair surface and the position of the carpet before ordering.

The 30mm profile height should likewise be taken into account when checking the overall fit. Looking at the three supplied dimensions together gives a clearer picture of the physical size of the edging and helps determine whether it is appropriate for the intended stair construction.

For projects involving multiple steps, measuring the staircase in advance can help establish how many 900mm sections are required. It can also help with planning the position of joins and ensuring the finished edging follows a consistent line across the staircase.

Aluminium Construction for a Defined Step Edge

The product is specified as being made from aluminium, providing a metal edge profile for stair and step applications. Aluminium edging can create a distinct visual separation between the carpet and the front edge of the tread.

The profile is particularly relevant where the staircase requires a dedicated step nose rather than simply finishing the carpet at the tread edge. Its dimensions provide a more substantial profile than a small decorative trim, so the available space around the stair edge should be checked before installation.

The supplied information does not provide additional details about the aluminium grade, surface treatment or specific performance rating. These characteristics should therefore not be assumed when assessing the product for a particular commercial or domestic project.

Instead, the key supplied considerations are the aluminium material, 900mm length, 46mm width, 30mm height and intended use on steps. These should be compared directly with the physical requirements of the staircase.

Screws Provided for Installation

The supplied specification states that screws are provided free with the product. This gives the installation package a stated fixing component and should be taken into account when planning the fitting process.

Before fixing the profile, the position of the nosing should be measured and checked carefully against the front edge of the tread. The carpet arrangement should also be considered so the edging is positioned correctly in relation to the finished flooring.

The stair surface needs to be assessed before installation, particularly on refurbishment projects. Any loose or unsuitable material should be addressed before fixing the nosing. Accurate marking can also help keep the profile straight and maintain a consistent position across multiple steps.

Although screws are specified as included, the supplied information does not provide details about screw size, quantity, plugs or the exact fixing procedure. These details should therefore be confirmed from the product information if they are important to the installation.

Carpet Stair Edge Finishing and Appearance

This stair nosing is specifically associated with carpeted stair applications. The profile can be used to create a dedicated transition between the carpeted tread area and the exposed front edge of the step.

When installing stair edging over or alongside carpet, the relationship between the profile and flooring needs to be considered carefully. Carpet thickness, tread construction and the available fixing area can all affect the finished result.

The 46mm width and 30mm height give the profile measurable dimensions that should be considered alongside the existing stair design. Checking these dimensions before purchase can help prevent compatibility issues and allows the installer to plan where the edging will sit.

For refurbishment work, it is also worth checking the existing stair edge for damage or instability. Preparing the surface properly before fixing can make it easier to achieve a straight and consistent finished edge.

Planning the Nosing Across Multiple Steps

When several stairs are being fitted with the same edging, consistent measurement and positioning become particularly important. The 900mm length provides a fixed section that can be assessed against each individual tread.

Measure each step before cutting or positioning the profile, especially if the staircase is older or the tread widths are not identical. Planning the required sections beforehand can help reduce waste and make the installation process more organised.

Suitable Applications and Buying Considerations

This aluminium stair nosing is intended for stair and step applications and is particularly relevant to carpeted stair projects. It can be considered for refurbishment, replacement or new installation work where a 900mm aluminium step-nose profile is suitable.

The supplied dimensions provide several important points to check before ordering. The 900mm length should be compared with the width of the tread, while the 46mm width and 30mm height should be assessed against the available space at the front of the stair.

The inclusion of screws also means the product is supplied with a stated fixing component, although the supplied information does not specify the exact screw details or installation procedure. Those details should be checked if the fixing system is a key requirement.

Frequently Asked Questions

What is this aluminium stair nosing used for?

This product is designed for finishing the front edge of stairs and steps, particularly carpeted stair applications. It provides a dedicated step-nose profile for the tread edge.

What size is the stair nosing?

The supplied size is 900mm x 46mm x 30mm. This corresponds to a 900mm length, 46mm width and 30mm height.

Is the stair nosing made from aluminium?

Yes. The supplied product specifications identify aluminium as the material.

Is it suitable for carpeted stairs?

Yes. The product is described as stair nose edging for carpet, making it suitable for consideration on carpeted stairs and steps.

Are screws included?

Yes. The supplied information states that screws are provided free with the product. Specific screw quantity and dimensions are not provided.

Can the 900mm profile be used on individual steps?

The 900mm length can be measured against individual stair widths to determine suitability. Each tread should be checked before installation, particularly where step dimensions vary.

What does the 46mm width refer to?

The 46mm measurement is one of the supplied profile dimensions and should be considered when assessing how much of the tread area the nosing will occupy.

What should I consider about the 30mm height?

The 30mm height contributes to the overall profile size. It should be compared with the available space around the stair edge and existing carpet arrangement before purchase.

Can this be used for stair refurbishment?

Yes, it can be considered for refurbishment projects involving carpeted stairs where an aluminium edge-nosing profile is required. Existing dimensions and fixing requirements should be checked first.

What should I check before buying?

Check that the 900mm x 46mm x 30mm profile suits the dimensions and construction of your stairs. Also consider the carpet arrangement and the supplied screw fixing when planning installation.