• 2.7m Length

• 57mm Tread Width

• Screw-Fix Installation

• Silver Aluminium with Black Rubber

• 57 x 33mm Heavy-Duty Non Slip Stair Edge Profile

Secure Stair Edge Finishing with a 57 x 33mm Profile

This 2.7m aluminium stair nosing is designed to create a secure, neatly finished leading edge on stairs used indoors or outdoors. The 57mm tread section provides useful coverage across the top of the step, while the 33mm riser section extends down the front edge for a more complete finish.

A silver aluminium body is combined with a black rubber grip section, giving the profile a practical two-tone appearance while supporting traction around the part of the stair that receives regular foot contact. The screw-fix installation method also allows the profile to be mechanically secured to a compatible stair substrate.

Aluminium and Rubber for Everyday Stair Use

The aluminium construction gives the nosing a rigid structure around the front of the stair. This can be particularly useful where an exposed edge needs additional finishing and a more consistent transition between the tread and riser.

The black rubber section provides the non-slip grip area. Because this section sits where footwear contacts the stair edge, keeping it clean and free from loose dirt is important for maintaining its intended grip performance.

The supplied features describe the profile as heavy duty, durable and easy to fit. These characteristics make it relevant for stairways exposed to regular use, although performance will still depend on correct fitting, substrate condition and ongoing maintenance.

Screw-Fix Installation for Firm Positioning

This stair nosing uses a screw-fix installation method rather than relying solely on adhesive. Mechanical fixing can provide a straightforward way to hold the profile against the stair edge when appropriate screws and fixing points are used.

Before installation, the stair surface should be clean, stable and carefully measured. The 57mm tread width and 33mm riser height should both be compared with the actual stair dimensions so the nosing can sit correctly without interfering with normal use.

The correct fixing hardware should be selected according to the underlying stair material. Different substrates may require different screws, plugs or preparation, so the fixing method should be matched to the specific installation rather than treated as identical for every staircase.

Where the Product Works Best

The supplied information lists stairs, hallways, entrances and workplaces as suitable areas for this profile. It can therefore be considered for residential entrances, internal stairways, workplace access areas and other compatible stair environments.

Indoor and outdoor installation is also specified. This gives the profile flexibility for spaces where stair edges may be exposed to different usage conditions, provided the substrate and installation method remain suitable for the location.

Its modern silver and black appearance can work particularly well where the stair edge needs to remain visible without introducing an overly decorative finish. Compatibility and secure fitting should still take priority over appearance when choosing a profile.

Planning the 2.7m Length Before Cutting

The profile is supplied as an individual 2.7m length. Depending on the width of the stairs, one piece may be divided into several shorter sections for individual steps.

Measure every stair before making the first cut because widths can vary slightly across a staircase. Adding a small trimming allowance to the total requirement can also help prevent shortages caused by exact theoretical calculations.

Planning the cutting sequence in advance can reduce unnecessary waste and make better use of the full 2.7m length.

Maintenance Information

Routine maintenance should include cleaning both the aluminium body and black rubber grip area. Dust, grit and loose debris should be removed regularly so they do not build up on the part of the profile intended to provide traction.

Use cleaning products appropriate for aluminium and rubber, avoiding unnecessarily abrasive tools that could affect the appearance of the surfaces.

The screw fixings should also be checked periodically. If the profile begins to move, lift or loosen, the fixing points should be inspected and corrected before continued foot traffic causes further movement.

Product Specifications

• Condition: New
• Length: 2.7m
• Material: Aluminium
• Tread Width: 57mm
• Riser Height: 33mm
• Installation: Screw Fix
• Colour: Silver with Black Rubber
• Installation Location: Indoor / Outdoor
• Suitable Areas: Stairs, Hallway, Entrance, Workplace
• Pack Size: Individual
• Style: Modern
• Room Suitability: Any Room, Basement, Indoor / Outdoor
• Country of Origin: United Kingdom
• Features: Non Slip, Heavy Duty, Durable, Easy to Fit, Safety Grip

Frequently Asked Questions

Is this stair nosing suitable for indoor and outdoor stairs?

Yes. The specifications list it for indoor and outdoor installation, including entrances, hallways, basements and workplaces where the profile dimensions and fixing method are suitable.

What are the dimensions of the stair nosing?

The profile is 2.7m long with a 57mm tread width and 33mm riser height. Check these measurements against the stair edge before ordering.

How is this stair nosing installed?

It uses a screw-fix installation method. Position the profile accurately and choose suitable screws for the underlying stair material so the nosing remains securely fitted.

What does the black rubber section do?

The black rubber section forms the grip area on the aluminium profile. It is designed to improve traction around the leading edge during normal stair use.

Where can this stair edging be used?

The listed suitable areas include stairs, hallways, entrances and workplaces. It can also suit basements and other compatible indoor or outdoor stair locations.

Is this stair nosing suitable for heavy-use areas?

Heavy duty and durable are included among the listed features. Correct fitting and routine inspection remain important where the stair edge receives regular foot traffic.

Can the 2.7m profile be cut to fit individual steps?

Yes. Measure each stair width and plan the required sections before cutting. Allow for trimming so the available 2.7m length can be used efficiently.

What colour is the stair nosing?

The profile is silver with black rubber. This creates a modern two-tone appearance while making the grip section visually distinct from the aluminium body.

How should the stair nosing be maintained?

Keep the aluminium and rubber surfaces free from dust and loose debris. Periodically inspect the screw fixings and clean both materials with suitable products.

What should I check before buying this profile?

Measure the stair width, tread depth and riser area, then compare them with the 57mm tread and 33mm riser dimensions. Confirm screw fixing is suitable for the substrate and intended installation environment before fitting.