• 0.9m aluminium stair nosing

• 30 x 30mm anti-slip edge trim

• Anodised aluminium stair profile

• Designed for finishing exposed stair edges

• A practical profile for creating a neat, consistent edge finish across interior stair treads

Anodised Aluminium Profile for Stair Edges

This anodised aluminium stair nosing is designed to provide a practical finishing profile along the front edge of a stair tread. The 30 x 30mm dimensions create a compact, balanced profile that can be used where a defined edge trim is required without selecting a substantially larger stair nosing.

The aluminium construction provides a rigid profile for finishing the leading edge of the step, while the anodised finish gives the trim a clean and structured appearance. It can be considered for stair renovation and flooring projects where the exposed edge of the tread needs a dedicated edging solution.

At 0.9m long, equivalent to approximately 35.43 inches, the profile is intended for applications where the available stair width can be accommodated within the supplied length. Measuring the tread before ordering is therefore important, particularly when the staircase contains wider or differently sized steps.

30 x 30mm Dimensions for a Compact Stair Finish

The 30 x 30mm profile provides a relatively compact format for stair-edge finishing. Its dimensions should be assessed against the actual tread and the amount of edge coverage required before installation. This is especially important when replacing an existing trim, as the new profile may have different proportions from the previous edging.

A correctly sized nosing should sit in the intended position without creating an unnecessary obstruction across the walking area. Measuring the front section of the tread and considering how the 30 x 30mm profile will meet the flooring can help with planning a cleaner installation.

For multiple-step projects, it is useful to check the dimensions of each tread rather than automatically assuming that every step is identical. Small differences in width or construction can affect how the profile is positioned and how much material is needed for the complete staircase.

The compact size can also be useful for projects where the stair edge needs to be visually finished without using a deeper or more prominent profile. The final appearance will depend on the existing flooring, stair construction and the accuracy of installation.

Anti-Slip Edge Trim for Stair Treads

This product is specified as an anti-slip stair nosing, making it suitable for applications where the front edge of a step requires an edging profile with a focus on grip. The trim provides a dedicated treatment for the leading edge rather than leaving the flooring or tread edge exposed.

Anti-slip performance on stairs can be influenced by the wider installation environment. Factors such as moisture, dust, dirt, footwear, surface condition and general maintenance can affect how much grip is available during everyday use. For this reason, the stair nosing should form part of an appropriately maintained staircase rather than being considered separately from the surrounding surface.

Correct alignment is also important. The profile should be positioned consistently along the front of the tread so that the intended edge area is covered evenly. Taking time to measure, mark and prepare the installation area can help produce a more secure and visually consistent result..

Anodised Aluminium for a Clean Edge Profile

The stair nosing is made from aluminium and features an anodised finish. Aluminium provides a rigid metal construction for a stair-edge profile, making it suitable where a structured edging solution is preferred over a flexible trim.

The anodised finish contributes to the overall appearance of the profile and can complement contemporary flooring and interior finishes. It also gives the stair edging a more finished appearance than leaving the exposed edge of the tread untreated.

When choosing an aluminium stair nosing, it is important to consider how the profile will work with the existing flooring and substrate. The 30 x 30mm dimensions should be compared with the available space at the front of the step to ensure that the profile can be installed in the intended position.

The existing surface should also be assessed before installation. A clean, stable and suitable substrate can make it easier to achieve accurate positioning and a consistent finish across the staircase.

0.9m Length for Individual Stair Applications

The supplied profile has a length of 0.9m, or approximately 35.43 inches. This gives a defined amount of coverage along the front edge of an individual stair tread and allows the required quantity to be calculated according to the dimensions of the staircase.

Before ordering, measure the width of each stair where the nosing will be installed. If the tread width is within the available 0.9m length, the profile can provide coverage for that step subject to the installation requirements. Wider or unusual stair layouts should be assessed separately.

For a staircase with several steps, calculating the number of lengths required in advance can help with project planning. It is also worth considering whether individual sections need to be cut to suit the actual tread dimensions and how the ends of adjoining profiles will be finished.

Accurate measurement can reduce unnecessary material waste and help maintain consistency across the installation. Marking each section before fitting can also make it easier to keep the aluminium profiles aligned from one step to the next.

Choosing Aluminium Nosing for Interior Stairs

When selecting stair nosing, the profile size, material, length and intended function should all be considered together. This product combines a 30 x 30mm profile with a 0.9m length, aluminium construction and an anti-slip specification, providing clear measurements to compare with the staircase.

The anodised finish makes the profile suitable for projects where the stair edging needs to form part of a clean interior finish. It can be considered when renovating existing stairs, completing a new flooring installation or replacing an older edge trim with a more structured aluminium profile.

Product Specifications

• Condition: New
• Product Type: Stair Nosing
• Material: Aluminium
• Finish: Anodised
• Profile Dimensions: 30 x 30mm
• Length: 0.9m / 35.43in
• Features: Anti-Slip
• Room: Any Room
• MPN: Does Not Apply

Frequently Asked Questions

What are the dimensions of this stair nosing?

This stair nosing has a 30 x 30mm profile and is supplied in a 0.9m length, equivalent to approximately 35.43 inches. The profile dimensions indicate the size of the stair-edge trim, while the 0.9m length determines the available coverage along the front edge of the tread.

What material is the stair nosing made from?

The stair nosing is made from aluminium and has an anodised finish. Aluminium provides a rigid construction for creating a structured stair-edge profile, while the anodised finish provides a clean appearance. The material should be considered alongside the stair surface and intended installation method when planning the project.

Is this stair nosing anti-slip?

Yes, the supplied specification identifies the product as an anti-slip stair nosing. It is designed to provide a dedicated edging profile along the front of the tread. Actual grip can vary according to conditions such as moisture, dirt, footwear, surface condition and installation quality.

What does the 30 x 30mm measurement mean?

The 30 x 30mm measurement refers to the profile dimensions of the stair nosing. These dimensions should be compared with the available space around the front edge of your stair tread before ordering. Checking the profile against the existing flooring and stair construction can help confirm that it will fit as intended.

How long is the aluminium stair nosing?

The stair nosing is 0.9m long, which is approximately 35.43 inches. This provides a fixed length of coverage for the front edge of a stair tread. Measure the width of your steps before ordering to determine whether one length is sufficient for each intended application.

Is the aluminium finish anodised?

Yes, the supplied product specification identifies the finish as anodised aluminium. The anodised finish provides a clean, structured appearance that can work well with different interior flooring styles. The final visual result will also depend on the surrounding stair material, flooring and accuracy of installation.

Can this stair nosing be used on multiple steps?

Yes, it can be considered for staircases with multiple steps, provided the 30 x 30mm profile and 0.9m length are suitable for each tread. Measure the individual steps first and calculate the required quantity. Consistent positioning across each step can help create a more uniform finished appearance.

Is this profile suitable for any room?

The supplied specification lists the room as any room. However, the actual suitability depends on the individual staircase and installation conditions. The tread dimensions, existing flooring, substrate and fitting requirements should all be checked before installation to ensure the aluminium profile is appropriate for the intended application.

How do I know if 0.9m is long enough for my stair?

Measure the width of the front edge of your stair tread and compare it with the 0.9m profile length. If the tread is wider than the available length, the profile may not provide complete coverage as supplied. Measuring before ordering is particularly important for wide, irregular or non-standard stairs.

What should I check before ordering this stair nosing?

Check the 30 x 30mm profile dimensions, the 0.9m length and the available space along the front edge of your stairs. You should also consider the existing flooring and substrate, as well as the intended installation method. For multiple steps, measure each tread and calculate the total number of lengths required.