• Aluminium Nosing
• Anodised Edge
• 35 x 15mm Profile
• 0.9m Length for Step Edges
• Practical Anodised Aluminium Trim for Neat Stair Edge Finishing

A Compact Aluminium Trim for Stair Edges

This anodised aluminium stair nosing provides a practical finishing profile for the leading edge of steps. With a 35 x 15mm profile and a 0.9m length, it is suited to staircase projects where a compact aluminium edge trim is required.

The aluminium construction gives the nosing a clean metal appearance, while the anodised finish adds a finished surface to the visible edge. Its relatively compact profile can be considered where the available tread and riser area does not require a larger stair-nosing section.

At 900mm long, the trim is also convenient for individual stair sections and smaller installation areas. Before ordering, the dimensions of the existing steps should be checked carefully to confirm that both the profile and length are suitable.

35 x 15mm Profile for Smaller Step Edges

The 35 x 15mm dimensions provide a compact profile for stair-edge finishing. Both measurements should be compared with the available tread and riser area before installation, particularly on stairs where space around the leading edge is limited.

The profile can be useful for projects where a more discreet aluminium edge is preferred rather than a deeper or wider nosing. However, the correct size ultimately depends on the physical construction of the staircase and the area available for the trim.

The 0.9m length, equivalent to 900mm, can be measured against individual step widths to establish how many lengths are required. If the staircase contains different widths or unusual sections, each relevant area should be measured separately rather than relying on a single measurement.

Anodised Aluminium for a Clean Finished Look

The anodised aluminium finish gives the stair trim a straightforward metal appearance that can complement a range of interior stair surfaces. Aluminium is particularly suitable where a dedicated metal edge profile is required as part of a staircase refurbishment or finishing project.

The anodised finish is confirmed in the supplied product information, but no specific anodising grade, coating thickness or colour specification is provided. These technical details should therefore not be assumed when assessing the product for a specialist application.

The trim can also provide a consistent visual line along the front edge of a step when correctly positioned. Careful alignment becomes increasingly important when several pieces are installed across a staircase, as uneven positioning can affect the overall appearance.

Suitable for Different Interior Staircase Settings

The product is listed as suitable for any room, allowing it to be considered for a variety of interior staircase environments. It can be used as part of stair refurbishment, replacement edging or a new installation where an aluminium stair-nosing profile is appropriate.

Before fitting, the existing stair edge should be checked for its condition and suitability. Any uneven or damaged surface may require preparation before the trim is installed. The available space should also be checked against the 35 x 15mm profile to make sure the finished trim will sit correctly.

Although the product is listed for any room, the actual installation requirements will vary according to the staircase material and construction. Measuring and inspecting the surface beforehand helps ensure that the selected trim is appropriate for the intended project.

Measuring and Planning the Installation

Accurate measurement is an important part of choosing stair nosing. Measure the width of the step edge and compare it with the 0.9m length. The 35 x 15mm profile should also be checked against the tread and riser dimensions to ensure that sufficient installation space is available.

Where multiple pieces are required, planning the position of each section before permanent fixing can help create a more consistent finished result. It is also useful to consider how joins or cut sections will be positioned across the staircase.

The supplied specifications do not state a particular fixing method or confirm that installation accessories are included. Adhesive, screws, clips or other fixing components should therefore not be assumed to come with the product. The appropriate fixing method will depend on the existing stair surface and the requirements of the installation.

Choosing a Compact Aluminium Stair Nosing

When selecting stair edging, the profile size, material, finish and length should all be considered together. This product offers a 35 x 15mm aluminium profile with an anodised finish and a 0.9m length, making it a practical option for projects requiring a compact metal stair edge.

The 900mm format can be particularly convenient for individual stair sections and smaller areas where a longer profile would be unnecessary. It also makes it easier to calculate material requirements based on the measured width of the steps.

The supplied information confirms the aluminium material, anodised finish, 35 x 15mm profile, 0.9m length and suitability for any room. It does not specify anti-slip performance, safety certification or a particular fixing system, so these features should not be assumed when comparing this product with other stair-nosing options.

Product Specifications

• Condition: New
• Product Type: Stair Nosing
• Material: Aluminium
• Finish: Anodised Aluminium
• Profile Size: 35 x 15mm
• Length: 0.9m / 900mm
• Suitable For: Any Room
• MPN: Does Not Apply

Frequently Asked Questions

What is this aluminium stair nosing used for?

This product is designed as a stair nosing for finishing the leading edge of steps. Its aluminium construction and anodised finish provide a clean metal profile for interior staircase projects where dedicated edge trim is required.

What are the dimensions of the profile?

The stair-nosing profile measures 35 x 15mm. These dimensions should be compared with the available tread and riser area to make sure there is sufficient space for the intended installation.

How long is each piece?

Each piece is 0.9m, or 900mm, long. This manageable length can be useful for individual stair sections and smaller staircase projects where a longer continuous profile is not required.

What material is the stair nosing made from?

The product is made from aluminium. The supplied specifications also identify an anodised aluminium finish, giving the visible profile a finished metal appearance.

What does the anodised finish refer to?

The anodised finish is the specified surface finish of the aluminium stair nosing. The available information does not state the exact anodising grade, coating thickness or technical finish specification.

Can it be used in any room?

Yes. The supplied product information lists the stair nosing as suitable for any room. The actual suitability should still be checked against the staircase surface, dimensions and installation requirements.

Is this stair nosing anti-slip?

The supplied specifications identify the product as stair nosing but do not state that it has an anti-slip surface. Additional slip-resistance performance or safety certification should therefore not be assumed.

Are fixing accessories included?

No fixing accessories are listed in the supplied information. Adhesive, screws, clips or other installation components should not be assumed to be included with the stair nosing.

How should I measure before ordering?

Measure the width of the stair edge where the trim will be installed and compare it with the 900mm length. Also check the 35 x 15mm profile against the available tread and riser space.

Is the 0.9m length suitable for individual steps?

The 0.9m length can be suitable for individual steps depending on their width. If the staircase contains wider or irregular sections, additional lengths may be required, so measuring each relevant section beforehand is recommended.