• 3mm LVT Inner Corner

• 250cm Length

• Matt Silver Finish

• Designed for Vinyl Flooring Edges

• Long Inner Corner Profile for Creating a Neat, Consistent Finish Around LVT and Vinyl Flooring Projects

A Practical Inner Corner Profile for LVT Flooring

This 250cm LVT inner corner profile is designed for projects using 3mm vinyl flooring where a clean finish is needed around an internal corner. Rather than leaving the corner exposed or relying on an uneven cut, an inner corner profile provides a dedicated edge detail that helps create a more finished appearance.

With its 250cm length, the profile is suitable for larger sections where a longer continuous piece can help reduce unnecessary joins. It can be considered for stair-related flooring work as well as other areas where LVT or vinyl flooring meets an internal corner.

3mm Flooring Compatibility

The profile is specified for 3mm vinyl flooring, making the flooring thickness an important consideration before purchasing. Measuring the existing floor covering is worthwhile, particularly when replacing an existing profile or completing an installation where the finished floor height needs to remain consistent.

For LVT and vinyl flooring projects, choosing a profile that corresponds with the flooring thickness can help achieve a more suitable edge finish. The 3mm specification should therefore be checked against the actual flooring being installed before ordering.

250cm Length for Larger Areas

At 250cm, or approximately 98.42 inches, this profile provides a substantial length for installations covering longer sections. Having a longer profile can be useful when planning an internal corner where a single piece is preferable to several shorter sections.

Before installation, measure the required run carefully and allow for accurate cutting where necessary. Taking measurements in advance can help minimise unnecessary joints and make better use of the available 250cm length.

Matt Silver Finish for a Clean Edge Detail

The matt silver finish gives the profile a neutral appearance that can work alongside a range of flooring colours and interior styles. Its subdued surface is suitable for projects where the corner detail needs to look tidy without creating an overly reflective finish.

The silver colour also provides a clear edge detail around the internal corner, helping distinguish the transition between the flooring and surrounding surface while maintaining a straightforward appearance.

Where an LVT Inner Corner Profile Can Be Used

This profile can be considered for several interior areas listed in the supplied specifications, including basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms. These different applications make accurate measurement and assessment of the individual installation particularly important.

For stair and flooring projects, the profile is intended around inner corner areas rather than as a general-purpose replacement for every type of stair edging. Checking the corner layout and flooring thickness before installation will help determine whether this particular profile is appropriate for the project.

Measuring, Installation and Replacement Considerations

Accurate preparation is important when fitting a 250cm inner corner profile. Measure the complete section first, check the 3mm flooring thickness, and determine where any cuts or joins will be required. The profile should be positioned carefully so that the finished corner follows the intended flooring layout.

The supplied specifications identify the product as easily replaceable and easy to install. Even so, the installation surface should be properly prepared and measurements should be checked before cutting. When replacing an existing profile, comparing the dimensions and corner arrangement with the new profile can help avoid compatibility problems.

Frequently Asked Questions

What flooring thickness is this inner corner profile designed for?

This profile is specified for 3mm vinyl flooring. Before ordering, measure the actual flooring thickness to make sure it corresponds with the stated 3mm specification.

How long is the LVT inner corner profile?

The profile is 250cm long, which is approximately 98.42 inches. This provides a relatively long section for larger flooring or corner installations.

What colour is the profile?

It has a silver colour with a matt finish. This provides a neutral edge detail that can work with different flooring colours and interior schemes.

Can this profile be used around stairs?

It is listed as an LVT inner corner and stair nosing edge profile. It is intended for inner-corner applications associated with suitable vinyl or LVT flooring rather than being treated as a universal stair nosing.

Which rooms can use this profile?

The supplied specifications list basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms as suitable room applications.

Is the profile easy to replace?

The product specifications describe it as easily replaceable. This can be useful when an existing profile needs to be removed and renewed during a flooring update.

Is it suitable for vinyl flooring?

Yes. The product title and specifications identify it for vinyl flooring, with a stated 3mm flooring thickness. Always check your flooring measurement before purchasing.

What should I measure before installation?

Measure the length of the inner corner and confirm the flooring thickness. Comparing these measurements with the 250cm profile length and 3mm specification helps establish suitability.

Does the profile have a glossy finish?

No. The supplied details specify a matt finish. The silver matt surface provides a more subdued appearance than a highly reflective finish.

Can the 250cm profile be cut to size?

The supplied information does not specify a cutting method or recommended cutting tool. If the profile needs shortening, the appropriate installation method should be confirmed before cutting.