• 5mm LVT Inner Corner

• 250cm Length

• Indoor Profile

• For Vinyl Flooring Edges

• Long Inner Corner Profile for Neat Finishing Around 5mm LVT and Vinyl Flooring Installations

Inner Corner Finishing for LVT Flooring

This 250cm LVT inner corner profile is designed for finishing internal corners where 5mm vinyl flooring is being installed. It provides a practical edge solution for areas where the flooring meets an internal corner and a clean, consistent transition is required.

The 5mm specification is an important consideration when selecting the profile. Checking the actual thickness of the flooring before ordering can help ensure the profile is suitable for the planned installation rather than relying on appearance alone.

5mm Flooring Compatibility

This profile is listed for use with 5mm flooring, making it particularly relevant to LVT and vinyl flooring projects where the finished floor covering matches this thickness. Accurate measurement is recommended when working with existing flooring or replacing an older edge profile.

A suitable inner corner profile can help create a more orderly finish at internal corners, particularly where precise flooring cuts alone may leave an exposed or visually uneven edge.

250cm Length for Extended Runs

With an item length of 250cm, or approximately 98.42 inches, this profile provides a substantial section for longer corner runs. A longer length can be useful when planning an installation where fewer joins are preferred.

Before cutting or fitting, measure the complete corner section and consider how the profile will meet adjoining edges. Careful planning can help reduce material waste and provide a more consistent finished appearance.

Indoor Applications Across Different Rooms

The product is specified as an indoor profile, making it intended for interior flooring applications. It can be considered for rooms where LVT or vinyl flooring requires an inner-corner finishing detail.

The suitability of the profile should still be assessed against the particular flooring system, corner arrangement and installation method. The supplied specifications do not provide a detailed list of individual room types, so the product should be selected primarily according to the flooring thickness and intended indoor application.

Using the Profile Around Stairs and Flooring Corners

The product title identifies it as a stair nosing edge profile with an LVT inner corner application. Its primary relevance is to internal corner finishing associated with suitable vinyl flooring installations.

When used around stairs, the layout should be checked carefully before installation. An inner corner profile is intended for a specific corner configuration, so it should not automatically be treated as a replacement for every type of stair nosing or external edge trim.

Measuring and Preparing Before Installation

Start by measuring the internal corner and confirming that the flooring is 5mm thick. The 250cm profile length should then be compared with the required run to establish whether one continuous section or a cut piece is appropriate.

The supplied information identifies the product as an indoor profile but does not specify the installation method, adhesive requirements or cutting tools. These details should therefore be confirmed according to the flooring system and installation conditions before fitting.

Product Specifications

• Condition: New
• Product Type: LVT Inner Corner / Stair Nosing Edge Profile
• Application: Indoor
• Flooring Thickness: 5mm
• Item Length: 250cm
• Length: 98.42"

Frequently Asked Questions

What flooring thickness is this inner corner profile for?

The product title specifies a 5mm flooring application. Check the thickness of the LVT or vinyl flooring before ordering to ensure it corresponds with the stated specification.

How long is the profile?

The item length is 250cm, which is approximately 98.42 inches. This gives a substantial length for longer internal corner sections.

Is this profile suitable for indoor use?

Yes. The supplied specification lists the product type as Indoor, so it is intended for interior applications.

Can it be used with LVT flooring?

Yes. The product title identifies it as an LVT inner corner profile for vinyl flooring. The stated 5mm flooring thickness should be checked against the flooring being installed.

Is this an inner or outer corner profile?

This is an inner corner profile. It is intended for internal corner configurations rather than external corners.

Can it be used around stairs?

The product title identifies it as a stair nosing edge profile. However, the exact stair configuration should be checked to make sure an inner corner profile is appropriate for the intended location.

What is the profile length in inches?

The supplied listing gives the length as 250cm and approximately 98.42 inches. The metric measurement should be used as the primary specification when planning the installation.

What should I check before buying?

The most important supplied specification to check is the 5mm flooring compatibility. You should also measure the required corner length and confirm that the application is indoors.

Does the listing specify the material?

No material is provided in the supplied item specifics. It would therefore be inappropriate to assume or add a material specification without supporting product information.

Does the listing specify a colour or finish?

No colour or finish is included in the supplied specifications. These details have therefore not been added to the product information.