• 3mm LVT Inner Corner

• 90cm Profile Length

• Matt Silver Finish

• For Vinyl Flooring

• Compact Inner Corner Profile for Creating a Neat, Consistent Edge Finish Around 3mm LVT and Vinyl Flooring

Inner Corner Finishing for 3mm LVT Flooring

This 90cm LVT inner corner profile is designed for finishing internal corner areas associated with 3mm vinyl flooring. It provides a dedicated profile where flooring meets an inward-facing corner, helping create a more orderly transition than leaving the corner exposed or relying solely on a flooring cut.

With its 90cm length, this profile is suited to smaller sections and individual corner areas where a shorter piece is more practical than a longer profile. The compact length can also make measuring and handling easier during flooring renovation or stair-related projects.

The 3mm flooring specification is an important consideration when selecting this profile. Before purchasing, measure the actual thickness of the LVT or vinyl flooring and compare it with the stated specification to help establish compatibility.

3mm Flooring Compatibility and Profile Selection

The profile is specifically associated with 3mm vinyl flooring, so flooring thickness should be checked before installation. LVT products can vary in thickness, and selecting a profile based on the actual flooring measurement is preferable to choosing one solely by appearance.

This is particularly relevant when replacing an existing corner profile. An older trim may have been installed with a different flooring thickness, so comparing its dimensions alone may not confirm that a replacement will fit the new flooring system.

For a new installation, consider how the flooring sits in relation to the internal corner and where the profile will meet the adjoining surfaces. Taking these measurements before ordering can help reduce the likelihood of selecting an unsuitable profile.

90cm Length for Smaller Corner Projects

The item length is 90cm, equivalent to approximately 35.49 inches. This makes the profile suitable for shorter internal corner runs where a 90cm section provides enough material for the intended installation.

Measuring the complete corner area before cutting or fitting is recommended. If only part of the profile is required, careful planning can help minimise unnecessary offcuts and make the remaining material useful for another suitable section.

The shorter format can also be convenient when working on individual areas during a flooring renovation. Compare the required corner length with the full 90cm profile before purchasing to make sure the available length meets the needs of the project.

Matt Silver Finish for a Neutral Flooring Detail

The profile has a matt finish and silver colour, giving it a neutral appearance around an internal flooring corner. This type of finish can complement different LVT and vinyl flooring styles while providing a visible edge detail.

The matt surface offers a more subdued appearance than a highly reflective finish. It can therefore work well where the profile needs to provide a finished corner detail without becoming an overly prominent feature within the room.

The supplied specifications confirm the silver colour and matt finish but do not provide information about a particular coating, surface treatment or colour matching system. No additional finish characteristics have therefore been assumed.

Stair and Interior Flooring Applications

The product is identified as an LVT inner corner and stair nosing edge profile, making it relevant to flooring projects where an internal corner needs finishing. It can be considered for suitable stair layouts as well as other indoor areas using compatible vinyl flooring.

The supplied room information includes basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms. These applications cover a range of interior environments, but the suitability of the profile should still be assessed according to the individual flooring system and installation conditions.

An inner corner profile should also be distinguished from an outer corner or general stair-edge trim. Checking the direction and shape of the corner before ordering helps ensure the selected profile corresponds with the actual area being finished.

Measuring and Preparing the Flooring Edge

Accurate preparation is important when installing an inner corner profile. Start by measuring the corner and confirming that the flooring is 3mm thick. The required corner run should then be compared with the 90cm profile length to establish how much material is needed.

Before final fitting, check how the profile aligns with the flooring and adjoining surfaces. Test positioning can help identify measurement or alignment issues before the profile is permanently installed.

The supplied specifications do not state the fixing method, adhesive type or recommended installation tools. These details should therefore be selected according to the flooring system and installation surface rather than being assumed. Proper preparation and careful measurement can help achieve a cleaner finished corner.

Product Specifications

• Condition: New
• Product Type: LVT Inner Corner / Stair Nosing Edge Profile
• Flooring Thickness: 3mm
• Item Length: 90cm
• Length: 35.49"
• Finish: Matt
• Colour: Silver
• Room: Basement, Bathroom, Bedroom, Conservatory, Kitchen, Living Room, Mudroom
• Category: Flooring & Tiles / Stairs & Railing

Frequently Asked Questions

What flooring thickness is this inner corner profile designed for?

This profile is specified for 3mm vinyl flooring. Before purchasing, measure the actual LVT or vinyl flooring thickness and compare it with the stated 3mm specification to help confirm that the profile is appropriate.

How long is the LVT inner corner profile?

The profile has an item length of 90cm, which is approximately 35.49 inches. This compact length is useful for shorter internal corner sections and smaller flooring projects.

Is this profile suitable for LVT flooring?

Yes. The product title identifies it as an LVT inner corner profile for vinyl flooring. The main compatibility point supplied is the 3mm flooring thickness, which should be checked against the actual flooring before ordering.

What finish and colour does the profile have?

The profile is listed with a matt finish and silver colour. This provides a neutral edge detail that can complement a range of flooring styles without relying on a highly reflective appearance.

Can this profile be used around stairs?

The product is identified as a stair nosing edge profile with an LVT inner corner application. It may therefore be suitable for compatible stair layouts where an internal corner requires finishing, but the exact stair configuration should be checked first.

Which rooms can this profile be used in?

The supplied room information includes basements, bathrooms, bedrooms, conservatories, kitchens, living rooms and mudrooms. These are the specific room applications provided with the product.

Is this an inner corner or outer corner profile?

This is an inner corner profile. It is intended for an inward-facing corner rather than an external corner, so checking the corner configuration before ordering is important.

What should I measure before buying?

Check the thickness of the flooring and confirm that it is 3mm. You should also measure the internal corner run and compare it with the 90cm profile length to determine whether the available section is sufficient.

Does the supplied information state the profile material?

No. The supplied item specifications do not provide a material. For accuracy, no material has been assumed or added to the product description or specifications.

Does the profile include a specified fixing method?

The supplied information does not state an adhesive, fixing system or installation tool. The appropriate installation method should therefore be determined according to the flooring system and surface where the profile will be fitted.