• 9mm Stair Nosing

• Self-Adhesive Design

• 2.7m Long Profile

• Suitable for Stairs and Steps

• Stick-Down Edge Nosing for Creating a Practical Finish Along Stair and Step Edges

A 9mm Stair Nosing Profile for Step Edges

This 9mm stair nosing is designed to provide a practical finishing profile along the front edge of stairs and steps. With an approximate 9mm depth, it offers a compact profile for projects where the nosing needs to sit neatly at the edge of the tread without using an unnecessarily large section.

The profile is suitable for stairs and steps and can be considered for both replacement work and new flooring projects where an edge nosing is required. Its straightforward profile makes it useful when the main requirement is to finish the front edge of a step cleanly while providing a dedicated nosing detail.

Self-Adhesive Stick-Down Installation

The self-adhesive stick-down design is intended to make fitting more straightforward than systems that require separate mechanical fixing or additional installation components. Before installation, the stair or step surface should be clean, dry, stable and free from loose material, dust or other debris that could affect adhesion.

Accurate positioning is particularly important with adhesive stair nosing because the profile needs to sit correctly along the front edge of the tread. Measuring each section before cutting can help reduce waste and ensure the nosing follows the intended line across the step.

2.7m Length for Stair and Step Projects

At 9ft, equivalent to approximately 2.7 metres, the supplied length provides a substantial section for stair and step applications. The available length can be measured against the individual tread widths required for a project before installation begins.

For projects involving multiple steps, planning the required cuts in advance can make better use of the 2.7m profile. Measuring the width of each step and allowing for the required finished edge can also help determine how many lengths are needed for the complete installation.

Compact 9mm Depth and Practical Edge Finishing

The approximately 9mm depth gives this stair nosing a relatively compact profile. This can be useful where a more restrained edge detail is preferred or where the available space at the front of the stair needs to be considered when selecting a suitable nosing.

As with any stair edging product, the existing stair construction and flooring should be checked before purchase. The profile should be compatible with the dimensions and surface arrangement of the particular steps, with attention given to the tread edge and the finished flooring level.

Where This Stair Nosing Can Be Used

The product is specified as suitable for stairs and steps, making it primarily relevant to stair-edge finishing rather than general-purpose floor edging. It can be considered for domestic or project-based stair applications where a 9mm edge profile and self-adhesive installation method meet the requirements of the installation.

The neutral profile allows the focus to remain on practical edge finishing rather than adding unnecessary bulk to the stair. Suitability should always be assessed against the existing tread dimensions, flooring construction and the condition of the surface where the adhesive will be applied.

Measuring and Preparing Before Fitting

Good preparation is an important part of achieving a neat result with stick-down stair nosing. Each stair should be measured carefully, with the intended position of the profile established before any cutting or adhesive application takes place.

The surface should be clean and dry, and any loose or unsuitable material should be dealt with before fitting. Once the correct position has been established, the 2.7m length can be measured and cut to the required sections. Taking time to check alignment before fixing helps ensure the finished nosing follows the front edge consistently across the staircase.

Product Specifications

• Condition: New
• Product Type: Stair Nosing
• Item Length: 9ft (2.7 metre)
• Item Depth: 9mm approx
• Installation: Self-Adhesive / Stick Down
• Suitable For: Stairs / Steps

Frequently Asked Questions

What is this stair nosing used for?

This stair nosing is designed for finishing the front edge of stairs and steps. It provides a dedicated edge profile that can be fitted along the tread edge where suitable.

What is the length of the stair nosing?

The supplied stair nosing is 9ft long, which is approximately 2.7 metres. This length can be measured and cut into sections for individual stair treads where appropriate.

What is the depth of the profile?

The item depth is approximately 9mm. This provides a relatively compact profile for stair and step edge applications.

Is this stair nosing self-adhesive?

Yes. The product is specified as self-adhesive and stick-down, so it is intended to be installed using its adhesive backing rather than relying on a separate fixing method.

What surfaces is it suitable for?

The supplied information specifies the product as suitable for stairs and steps. The existing surface should be clean, dry, stable and suitable for adhesive installation before fitting.

Can the 2.7m length be cut?

The 2.7m length can be measured against the required stair sections during project planning. Appropriate cutting should be carried out carefully to achieve the required individual lengths.

Is it suitable for a complete staircase?

It may be suitable for a staircase where the dimensions, surface condition and installation requirements match the profile. The number of lengths required will depend on the width and number of individual steps.

How should the stairs be prepared before installation?

The fitting surface should be clean, dry and free from loose material, dust and other contamination. Careful measurement and positioning are also important before the adhesive is applied.

What should I check before buying?

Check the approximately 9mm profile depth, 2.7m overall length, self-adhesive installation method and the dimensions of your stair or step edges. These details will help confirm whether the profile is appropriate for your project.