• Aluminium Nosing
• Anodised Edge
• 30 x 30mm Profile
• 0.9m Length for Step Edges
• Anti-Slip Aluminium Stair Nosing for Practical Step Edge Finishing

A Practical Aluminium Profile for Stair Edges

This anodised aluminium stair nosing provides a practical way to finish and protect the leading edge of steps while creating a clean, consistent profile along the front of the tread. The 30 x 30mm dimensions give the trim a substantial profile that can suit staircases where a more noticeable edge section is required.

Supplied in a 0.9m length, equivalent to 35.43 inches, the profile is suitable for individual stair sections where a shorter length is easier to measure, position and work with. The aluminium construction provides the core material of the trim, while the anodised finish gives the visible edge a neat metal appearance.

The product information also identifies an anti-slip edge, making it an option for stair projects where an edging profile with additional grip characteristics is required. The actual suitability will depend on the staircase construction and the requirements of the installation.

30 x 30mm Profile for a More Substantial Step Edge

The 30 x 30mm profile provides a relatively substantial stair-edge section, so measurements should be checked carefully before ordering. Compare both dimensions with the available tread and riser surfaces to make sure the profile can sit correctly without interfering with surrounding areas.

A 0.9m length can be convenient for individual steps or smaller sections of a staircase. Where multiple steps require nosing, the number of pieces needed should be calculated from the actual stair widths rather than assuming that every staircase has the same dimensions.

The shorter format can also be useful when planning installations where handling longer aluminium sections would be unnecessary. Measuring each relevant step in advance helps establish how the 900mm length will be used and whether additional sections are required.

Anodised Aluminium with an Anti-Slip Edge

The aluminium construction gives this stair nosing a clean metal profile, while the anodised edge provides the specified finish. The product is also described as having an anti-slip edge, which adds a practical feature for stair-edge applications where grip is an important consideration.

The anti-slip characteristic should be considered alongside the overall staircase design rather than as a replacement for appropriate installation or general stair safety measures. The supplied information does not provide a specific slip-resistance rating, testing standard or certification, so these details should not be assumed.

The anodised finish is likewise specified as part of the product information, but no technical details are provided regarding the anodising grade, coating thickness or exact finish specification.

Suitable for Different Interior Stair Applications

The product is listed as suitable for any room, giving it flexibility across a variety of interior staircase projects. It can be considered for residential staircases, refurbishment work or other indoor applications where an aluminium stair-nosing profile is appropriate.

Before installation, inspect the existing stair edge and check that the surface is suitable for the chosen fixing method. Uneven, damaged or poorly prepared surfaces may require preparation before the nosing is fitted.

It is also important to consider the relationship between the 30 x 30mm profile and the existing tread and riser. A suitable fit should allow the trim to sit consistently along the step edge without creating an unwanted obstruction.

Measuring and Preparing the Stair Nosing

Accurate preparation is particularly important with a 30 x 30mm profile. Measure the available tread depth and the front edge of the riser before deciding whether the dimensions are appropriate. If the staircase contains different step widths or unusual sections, measure those areas separately.

The 0.9m length should also be checked against the width of the individual step. Where a step is wider than the supplied profile, more than one piece may be required, depending on the intended layout and installation approach.

Product Specifications

• Condition: New
• Product Type: Stair Nosing
• Material: Aluminium
• Finish: Anodised Aluminium
• Profile Size: 30 x 30mm
• Length: 0.9m / 35.43in
• Features: Anti-Slip Edge
• Suitable For: Any Room
• MPN: Does Not Apply

Frequently Asked Questions

What is this aluminium stair nosing used for?

This product is designed to finish the leading edge of stairs with an aluminium profile. It provides a structured edge trim while also featuring the anti-slip edge specified in the product information.

What are the dimensions of this stair nosing?

The profile measures 30 x 30mm. These dimensions should be compared with the available tread and riser space to ensure the trim is suitable for the intended staircase.

How long is each piece?

Each piece measures 0.9m, which is approximately 35.43 inches. This length can be convenient for individual steps or shorter staircase sections where a manageable profile is preferred.

Is the stair nosing made from aluminium?

Yes. The supplied specifications identify aluminium as the material. The product is also listed with an anodised aluminium finish, providing a finished metal appearance.

Does this stair nosing have an anti-slip edge?

Yes. The supplied product information specifically identifies an anti-slip edge as a feature. However, no particular slip-resistance rating or certification is provided, so those details should not be assumed.

What does the anodised finish mean?

The anodised finish refers to the stated surface treatment of the aluminium edge. It provides the profile with its specified finished appearance. The supplied information does not provide details about coating thickness or anodising grade.

Can it be used in any room?

The product is listed as suitable for any room. It can therefore be considered for different interior staircase environments, subject to the dimensions and surface conditions of the particular installation.

Are fixing accessories supplied?

The supplied specifications do not list any adhesive, screws, clips or other fixing accessories. A specific fixing system should therefore not be assumed to be included with the stair nosing.

How should I measure before ordering?

Measure the tread and riser areas where the nosing will sit and compare them with the 30 x 30mm profile. Also measure the width of each step against the 0.9m product length to determine the required quantity.

Is 0.9m suitable for individual stair sections?

A 0.9m length can be suitable for individual stair sections depending on their width. If the staircase has wider or differently shaped steps, additional lengths may be needed. Measuring each section beforehand is recommended.