• Black Finish

• 1 Metre Length

• 55x55mm GRP Profile

• Anti-Slip Chamfered Stair Edge Design

• Durable GRP Stair Nosing for Clearly Defined and Practical Step Edges

Black GRP Protection for Defined Stair Edges

This 1 metre black GRP stair nosing is designed to create a clearly defined finish along exposed stair edges while adding a practical textured surface at the front of the tread. Its 55x55mm profile provides coverage across both the horizontal tread and the front face of the step, helping form a consistent edge around suitable staircase installations.

The black finish offers a neutral appearance that can coordinate with darker flooring, industrial interiors, and areas where a less visually prominent stair edge is preferred. Unlike bright high-visibility profiles, the black surface provides a more understated finish while retaining the practical characteristics associated with a GRP stair nosing.

Its rigid GRP construction also makes the profile suitable for projects where a durable non-metallic stair-edge solution is required.

55x55mm Profile for Broad Step Edge Coverage

The stair nosing measures approximately 55mm x 55mm, giving installers clear dimensions for checking compatibility with the intended staircase before fitting. One section covers the tread area while the second follows the front edge, creating an angled profile around the stair corner.

These dimensions should be compared with the actual step before installation. Stair surfaces, floor coverings, and existing profiles can all affect how the nosing sits once positioned.

Accurate measuring is particularly important on refurbishment projects, where previous edging or variations in tread construction may influence the final fit.

Anti-Slip Surface for Regular Foot Traffic

The product is described as anti-slip, making its textured surface an important feature for everyday stair use. A more textured tread edge can provide additional surface definition compared with a smooth finishing profile, particularly in areas where steps experience regular foot traffic.

The surface should still be kept clean because dust, grit, grease, and other contamination can build up on textured materials. Routine cleaning helps maintain the condition of the profile and keeps the stair edge looking tidy.

The supplied information does not include a numerical slip-test result, so any project requiring documented slip resistance should confirm the appropriate technical data separately.

Chamfered Edge and DDA-Listed Design

The product title identifies this stair nosing as having a chamfered edge. A chamfered rear section can create a more gradual transition between the GRP profile and the surrounding stair surface, helping avoid an unnecessarily abrupt raised edge behind the nosing.

The listing also describes the product as DDA compliant. However, supporting certification, installation criteria, and detailed compliance information are not included in the supplied specifications.

For commercial, public, or regulated projects, the relevant technical documentation and completed installation should therefore be checked against the applicable accessibility requirements rather than relying on the product title alone.

1 Metre Length and Routine GRP Maintenance

Each profile measures 1 metre in length, making it suitable for many individual stair treads. Where the step is narrower, the GRP profile may need to be shortened using a cutting method appropriate for the material.

Every tread should be measured individually before cutting because stair widths can vary even within the same staircase. Careful marking helps maintain consistent lengths across several steps and reduces unnecessary waste.

For maintenance, use cleaning methods suitable for GRP and avoid allowing dirt to accumulate on the textured surface. Gentle routine cleaning and periodic inspection can help keep the stair nosing properly positioned and maintain its black finish over time.