• Yellow Finish

• 3 Metre Length

• 55x55mm GRP Profile

• High-Visibility Anti-Slip Stair Nosing

• Long GRP Stair Edge Profile for Clearly

High-Visibility GRP Protection for Longer Stair Edges

This 3 metre yellow GRP stair nosing is designed to provide a clearly defined finishing profile along exposed stair edges while adding strong visual contrast at the front of the tread. The bright yellow finish helps distinguish the edge of a step from surrounding flooring, making it suitable for areas where clear stair-edge visibility is important.

The profile is manufactured from GRP and measures approximately 55mm x 55mm. This gives it substantial coverage across both the horizontal tread and the front section of the stair edge.

Its longer 3 metre format also provides flexibility for larger staircase projects, allowing the profile to be measured and cut according to individual tread widths where required.

55x55mm Profile for Broad Stair Edge Coverage

The 55mm x 55mm profile provides a balanced amount of coverage around the stair corner. One section sits across the upper tread while the other covers the front edge, helping create a more complete transition around the step.

These dimensions should be compared with the existing staircase before installation. Stair shapes, coverings, and finished floor levels can vary considerably, particularly in refurbishment projects.

Checking the tread depth and front edge carefully can help confirm whether the profile will sit correctly without unwanted gaps or uneven positioning.

Anti-Slip Surface for More Defined Tread Contact

The product is described as anti-slip, making the surface an important part of its intended stair-edge function. A textured GRP profile can provide a more defined contact area at the front of the tread than a completely smooth finishing strip.

Routine cleaning remains important because dust, grease, mud, and other loose debris can affect the condition of textured stair surfaces over time. Keeping the profile clear helps maintain both its visible yellow finish and practical tread surface.

The supplied specifications do not include a numerical slip-test value, so any project requiring documented slip resistance should confirm the relevant test information before installation.

3 Metre Length for Flexible Cutting and Planning

Each profile measures 3 metres in length, making it useful for installations where several stair sections may need to be cut from one continuous piece. This can offer greater flexibility than using multiple shorter profiles.

Every tread should still be measured individually before cutting. Older staircases and renovated buildings may have small variations in step width, even when the differences are not immediately visible.

Planning all required lengths before cutting can help reduce offcuts and make better use of the supplied profile. A suitable cutting method for GRP should be used where shortening is required.

High-Visibility Finish and Compliance Considerations

The yellow colour is designed to provide strong visual contrast around the stair edge and is described as high visibility in the product title. This makes the profile relevant for spaces where identifying the front of each tread clearly is an important part of the staircase design.

The product is also listed as DDA compliant. However, the supplied information does not include certification, installation criteria, or supporting test documentation. Where formal accessibility compliance is required, the completed installation and relevant technical documents should be checked against applicable requirements.

For routine care, use suitable non-abrasive cleaning methods and keep the textured GRP surface free from accumulated debris.