• Rubber Bullnose Nosing

• Non-Slip Step Edge

• 118cm Stair Nosing Strip

• 70x40mm Bullnose Edge Profile

• Practical Trim for Finishing Interior Stair Edges

Bullnose Profile for a Finished Stair Edge

A stair nosing provides a practical way to finish the exposed front edge of a step while creating a more defined transition between the tread and riser. This bullnose-style profile is designed for stair applications where a substantial edge trim is preferred over a narrow finishing strip.

The 70x40mm profile gives the nosing a noticeable presence around the front of the step. It can help create a consistent appearance along the leading edge while providing a dedicated surface at the point where the stair tread meets the front edge.

With a length of 118cm, the strip is suitable for stair widths that fall within this measurement. The exact dimensions of the existing step should be checked before ordering to ensure the profile provides the required coverage.

70x40mm Dimensions for Step Edge Coverage

The 70x40mm profile should be considered carefully when assessing compatibility with an existing staircase. The dimensions determine how much of the front edge and surrounding tread area the nosing will occupy once installed.

A larger profile can be useful where the stair requires more substantial edge coverage, but available tread space should always be checked first. Measuring the depth and front edge of the step helps confirm that the nosing can sit in the intended position without creating an unsuitable projection.

The 118cm overall length should also be compared with the complete width of each stair. Individual steps should be measured rather than relying on assumptions, particularly where staircase dimensions may vary.

Checking the Existing Stair Profile

Before installation, inspect the shape and condition of the existing step. The surface should be stable and suitable for the chosen installation method. Any existing trim or edge treatment should also be taken into account when checking whether the 70x40mm profile is appropriate.

Non-Slip Design for Everyday Stair Use

The product is specified as non-slip, making it suitable for stair applications where additional grip at the step edge is desirable. The front portion of a stair receives regular foot traffic, so a clearly finished edge with a non-slip feature can be a practical consideration when completing an interior staircase.

The nosing can also make the leading edge of the step more visually distinct. This gives the staircase a more consistent finished appearance while providing a dedicated edge profile.

Non-slip performance should always be considered alongside correct installation and the condition of the underlying staircase. The nosing is intended as an edge-trim solution rather than a replacement for a structurally sound stair.

PVC Construction for Interior Applications

The supplied specification identifies PVC as the material. This provides a practical profile for interior stair applications where a shaped edge trim is required. The material is formed into the specified bullnose profile, giving the product a defined shape for positioning along the front of a step.

The product is listed as suitable for any room, providing flexibility for different indoor staircase locations. However, the individual installation environment should still be assessed to ensure that the profile, dimensions and surface conditions are suitable.

For a cleaner result, the installation surface should be properly prepared before fitting. Dust, loose material and uneven areas should be addressed according to the requirements of the selected installation method.

Measuring Before Choosing Stair Nosing

Accurate measurement is important when selecting a stair nosing. Start by measuring the full width of the stair and compare it with the 118cm strip length. The tread depth and shape of the front edge should then be checked against the 70x40mm profile.

If multiple steps are being completed, measuring each tread individually can be useful because older or customised staircases may contain small differences between steps. This helps confirm that the same profile can be used consistently throughout the installation.

Creating a Consistent Staircase Finish

A consistent edge treatment can give a staircase a more finished and coordinated appearance. The bullnose profile follows the leading edge of the tread, creating a defined transition across the front of the step.

For projects involving several stairs, careful alignment is important. Keeping the nosing positioned consistently from one side of each tread to the other can help produce a neater overall result.

Before completing installation, check the positioning of the strip and make sure it follows the stair edge correctly. Taking time with measurement, preparation and alignment can improve the final appearance and help ensure the profile is used as intended.

Product Specifications

• Condition: New
• Product Type: Stair Nosing
• Material: PVC
• Length: 118cm
• Profile Size: 70x40mm
• Style: Bullnose
• Feature: Non-Slip
• Suitable For: Any Room

Frequently Asked Questions

What is this stair nosing used for?

This stair nosing is designed to finish the front edge of stair steps while providing a bullnose profile and non-slip feature. It can be used where a more substantial edge trim is required for an interior staircase.

What material is the product made from?

The supplied specification lists PVC as the material. The PVC construction is formed into the specified 70x40mm profile for use as a stair-edge trim.

What are the dimensions?

The stair nosing measures 118cm in length and has a 70x40mm profile. These measurements should be compared with the existing stair before purchase to confirm suitability.

Is this a bullnose stair nosing?

Yes. The product is described as a bullnose stair nosing, providing a shaped profile for finishing the leading edge of a stair tread.

Does it have a non-slip feature?

Yes. The supplied specification identifies the product as non-slip, making it suitable for stair applications where additional grip at the step edge is desirable.

Can it be used in any room?

The supplied information states that it is suitable for any room. The actual installation location should still be checked to ensure the dimensions and surface conditions are appropriate.

Is 118cm suitable for my stairs?

It depends on the width of the individual stair. Measure the complete front edge of the tread and compare it with the 118cm length before ordering.

What should I measure before buying?

Check the stair width, tread depth and front-edge shape. You should also compare the available space with the 70x40mm profile to ensure it can sit correctly.

Is it suitable for residential staircases?

It can be considered for residential interior staircases where the dimensions and profile are compatible with the existing steps and the surface is suitable for installation.

How should the stair be prepared?

The stair should be clean, stable and suitable for the selected installation method. Existing loose material, dirt or unsuitable surface conditions should be addressed before fitting the nosing.