• 1m Length

• Silver Aluminium Finish

• Black Rubber Inserts

• 35x19.5mm Anti-Slip Stair Profile

• Anodised Aluminium Stair Nosing for Clean

Silver Aluminium Profile for a Clean Stair Edge

This 1 metre stair nosing is designed to provide a clean and clearly defined finish along exposed stair edges. The anodised aluminium construction gives the profile a rigid structure, while the silver surface creates a neutral appearance that can work alongside many different flooring colours and interior finishes.

Black rubber inserts provide contrast against the silver aluminium and give the tread edge a more noticeable surface. This combination makes the profile suitable for staircase projects where a plain metal edge may not provide the preferred level of surface definition.

The 1 metre length is practical for many individual stair treads and provides enough material to measure against the actual width of the step before installation.

Black Rubber Inserts for Added Surface Texture

The profile incorporates black rubber inserts that create a textured contact area along the stair edge. The product is described as anti-slip, making the rubber sections an important part of the overall tread-edge design.

The contrasting black inserts also make the front of the stair easier to distinguish visually from the surrounding silver aluminium. This can give the staircase a more structured appearance while keeping the overall design modern and relatively understated.

Regular cleaning is important because dust and loose debris can collect on textured rubber surfaces. Keeping the inserts clear helps maintain their appearance and surface condition during everyday use.

35x19.5mm Size for Profile Compatibility

The product title identifies the stair nosing with dimensions of approximately 35mm by 19.5mm. These measurements should be compared carefully with the existing stair edge and finished flooring level before permanent installation begins.

Floor coverings and stair constructions can vary considerably between properties. Carpet, laminate, wood flooring, underlay, or existing trims may all affect how the profile sits around the tread.

Checking the dimensions in advance can help prevent unwanted gaps or poor alignment. This is particularly important when fitting the nosing to an existing staircase where the flooring has already been installed.

1 Metre Length for Measuring and Cutting

Each profile is supplied in a 1 metre length, making it suitable for many individual stair treads. However, stair widths are not always identical, particularly in older properties or previously renovated interiors.

Each tread should therefore be measured separately before the aluminium profile is cut or permanently positioned. Where the required width is shorter than 1 metre, the profile may need to be trimmed using a suitable method for aluminium.

The supplied information does not specify the fixing system, so installation should be based on the actual profile design and staircase construction rather than assuming screws or adhesive are required.

Caring for the Anodised Aluminium and Rubber

The anodised silver surface can be maintained using gentle, non-abrasive cleaning methods. Everyday dust and light marks can generally be removed with a soft cloth without using aggressive chemicals or abrasive tools.

The black rubber sections should also be cleaned regularly, particularly where dirt gathers within the textured areas. Keeping both materials clean helps maintain the contrast between the silver profile and black inserts.

Harsh cleaners should be avoided unless their compatibility with anodised aluminium and rubber has been confirmed. Routine light maintenance is generally the better approach for keeping the stair nosing neat and consistent over time.