• Matt Brass Finish
• 0.9 Metre Length
• 50mm Aluminium Ramp Profile
• Self-Adhesive Transition Strip with 15mm Cover
• Practical Retro-Fit Flooring Transition for Neat Changes Between Adjacent Floor Levels

Matt Brass Aluminium Finish for Floor Transitions

This 0.9 metre aluminium transition strip is designed to create a cleaner and more finished connection between adjacent flooring surfaces. Its matt brass appearance provides a warmer alternative to standard silver aluminium, making it suitable for interiors that feature timber tones, neutral flooring, or brass-effect decorative details.

The rigid aluminium construction gives the strip a stable profile for floor-edge finishing, while the 50mm width provides useful coverage across the transition area. It is intended as a ramp-style transition rather than a conventional stair nosing, making it more appropriate for joining floor surfaces where a gradual change in level needs to be covered.

The matt finish also offers a softer visual effect than highly polished metal.

50mm Ramp Profile with 15mm Cover Capacity

The transition profile is approximately 50mm wide and is described as providing up to 15mm of cover. This makes it suitable for applications where adjoining floor surfaces have a small difference in height that requires a sloped transition.

Before installation, both flooring levels should be measured carefully to check that the ramp dimensions are appropriate for the intended gap or height change. Flooring thickness, underlay, existing thresholds, and substrate condition can all influence the finished position.

The supplied information does not state the precise overall profile height or material thickness, so these measurements should be confirmed where exact compatibility is important.

Self-Adhesive Installation for Retrofit Projects

The aluminium strip uses a self-adhesive fitting system, allowing it to be installed without a separately specified screw-fixing method. This can make it useful for renovation projects where drilling into the floor is undesirable or where a simpler retrofit solution is preferred.

For effective installation, the underlying surface should be clean, dry, stable, and free from dust, grease, loose material, or cleaning residues. Adhesive-backed profiles rely on good surface contact, so careful preparation is an important part of the fitting process.

The strip should be aligned and checked before firm pressure is applied along its full length.

0.9 Metre Length for Doorways and Floor Edges

At approximately 0.9 metres, or 900mm, long, the profile is suitable for many doorway transitions and shorter floor-edge applications. If the required opening is narrower, the aluminium strip can be shortened using an appropriate metal-cutting method.

Measuring the transition area before cutting helps achieve a cleaner finish and reduces the risk of leaving excessive gaps at either end. Where several doorways are being completed, each opening should be measured independently rather than assuming identical dimensions.

The longer strip can also be planned for other compatible transition areas where the 50mm ramp width and 15mm cover are suitable.

Maintaining the Matt Brass Transition Profile

The matt brass finish provides a decorative metallic appearance while remaining relatively understated. It can complement a range of flooring styles where a warm-toned threshold or transition detail is preferred over bright silver aluminium.

Routine care can generally be carried out using a soft cloth and mild, non-abrasive cleaning methods suitable for finished aluminium. Abrasive pads and strong chemicals should be avoided where possible because they may scratch or alter the visible surface.

Periodic inspection can also help ensure the adhesive remains secure and that the profile continues to sit evenly between the adjoining floor surfaces.

Product Specifications

• Condition: New with Tags
• Material: Aluminium
• Colour: Matt Brass
• Profile Length: 0.9m / 900mm
• Profile Width: 50mm
• Cover Capacity: Up to 15mm
• Profile Style: Ramp Transition
• Installation: Self-Adhesive
• Application: Floor Transition / Threshold
• Country of Origin: United Kingdom
• Item Weight: Approx. 0.05kg
• Fixing Method: Self-Adhesive
• Fixings Supplied: Not Specified
• Profile Thickness: Not Specified
• Overall Profile Height: Not Specified

Frequently Asked Questions

What is this aluminium strip designed for?

This profile is intended as a ramp-style floor transition strip. It is designed to create a neater connection between adjacent flooring surfaces where a small level difference needs covering.

How long is the transition strip?

The profile measures approximately 0.9 metres, or 900mm, in length. This size is suitable for many standard doorway and short floor-transition applications.

What is the width of the profile?

The listed profile width is approximately 50mm. This provides a relatively broad transition area across the junction between two adjoining floor surfaces.

What does the 15mm cover mean?

The product is described as offering up to 15mm of cover. This should be checked against the actual difference in floor height before installation to confirm suitability.

Is the transition strip self-adhesive?

Yes. The profile features a self-adhesive fitting system, so no separately specified screws are required according to the supplied product information.

Is this profile made from solid brass?

No. The construction material is aluminium. Matt brass refers to the visible colour and finish applied to the surface of the aluminium transition strip.

Can the 900mm strip be cut shorter?

Yes. Aluminium can be shortened using a suitable metal-cutting method. Measure and mark the required length carefully before making any permanent cuts.

Is this a stair nosing profile?

No. The supplied information identifies it as a self-adhesive ramp transition strip rather than a stair nosing. It is intended primarily for flooring transitions and thresholds.

How should the floor be prepared before fitting?

The surface should be clean, dry, level, and free from dust, grease, or loose material. Proper preparation helps the adhesive backing achieve better contact.

How should the matt brass finish be cleaned?

Use gentle, non-abrasive cleaning methods suitable for finished aluminium. Avoid rough pads or strong chemicals that could scratch, dull, or otherwise affect the visible surface.